In Stock V8 platform · 21.6 V
Dyson SV10 Replacement Battery — 21.6 V, 4.0 Ah
SV10 is the model code Dyson prints on the machine; V8 is the name it is sold under. It is one platform and one pack: 21.6 volts, 4.0 Ah, Panasonic A grade 18650 cells, replacing code 214730-01 and the rest of the V8 code family. It lists at AU $70.99 and sells at AU $52.79 — the same price as our V8 page — shipped free from Granville, Sydney with a full 1 year warranty.
If your label says V8, buy the pack on our V8 page — same battery, same money.
Will it fit your machine?
Fits these Dysons
- SV10 Absolute
- SV10 Animal
- SV10 Fluffy
- V8 Absolute, V8 Animal, V8 Animal Exclusive, V8 Fluffy
- Machines carrying 214730-01, 164527-01, 229602-01, 215866 or 967834-02
Do not buy it for
- V7 or SV11 — those use 968670-02 / 225403
- V6, DC58–DC74, SV03–SV09 — the V6 family packs
- V10 or SV12 — the 25.2 V platform
- DC31–DC45 handhelds — 22.2 V legacy
- V11, V12, V15, Gen5 — outside our range
| Voltage | 21.6 V |
|---|---|
| Capacity | 4.0 Ah (4000 mAh) |
| Energy | 86.4 Wh (21.6 V × 4.0 Ah) |
| Chemistry | Li-ion |
| Cells | Panasonic A grade 18650 |
| Primary part code | 214730-01 |
| Also replaces | SV10 · 164527-01 · 229602-01 · 215866 · 967834-02 |
| Warranty | 1 year, plus 30 day money back |
| Dispatch | Granville, Sydney NSW 2142 · processed within 24 hours |
What arrives with your order
- 1 × compatible SV10 / V8 platform battery, 21.6 V 4.0 Ah
- Your original retaining screws are reused to clamp the pack in place
- Free Australia Post shipping, tracked, from the Sydney warehouse
- List price
- AU $70.99
- Selling price
- AU $52.79
- Stock line
- In Stock
- SKU
- 214730-01
- Charger needed?
- No — your existing 21.6 V Dyson charger is used
SV10 and V8 are the same purchase. Dyson names the machine SV10 on the label and sells it as a V8 in the shop, so our two pages carry the identical pack, the identical 4.0 Ah capacity and the identical AU $52.79 price. Whichever word is on your machine, order once — and read which Dysons share a battery if the label says something else again.
Dyson SV10 compatible battery · 21.6 V · 4.0 Ah
In Stock — Sydney warehouse, processed within 24 hours
- Dyson AU list
- AU $150.00 (part 972237-01)
- Our price
- AU $52.79
- Difference
- AU $97.21 (65% less)
- Same pack as
- Dyson V8 replacement battery page
- Shipping
- Free, Australia Post, tracked
- Warranty
- 1 year + 30 day money back
- Payment
- PayPal or bank deposit
The Add-to-cart button and the product structured data both open the live listing for this exact pack: SV10 listing on aussiebatt.com
SV10 battery price against Dyson Australia
Dyson Australia sells one genuine pack covering both V7 and V8 SKU codes. The SV10 sits inside that V8 group.
| Item | Dyson AU list price | AussieBatt | Difference |
|---|---|---|---|
| V7 / V8 replacement battery, part 972237-01 | AU $150.00 | AU $52.79 | AU $97.21 · 65% less |
| Pre-filter (V6 / V7 / V8 / DC58 / DC59) | AU $35.00 | — | — |
| Charger (V6 / V7 / V8 / DC58 / DC59) | AU $40.00 | see chargers | your existing charger works |
OEM prices shown are Dyson Australia list prices for the corresponding genuine part, checked on dyson.com.au on 31 October 2026. Dyson changes prices and availability — confirm before relying on the saving figure. The saving column is subtraction between two published prices, not a quote.
Buy it once, not twice
Because the SV10 and V8 pages describe the same battery, do not order both. Two packs of the same code will be treated as two sales, and the 30 day money back window is there for a genuine wrong fit rather than a duplicate. Every figure on this platform is compared side by side on the Dyson Australia price comparison.
Four things this pack restores to an SV10
4.0 Ah, 86.4 Wh
21.6 V × 4.0 Ah = 86.4 Wh of stored energy, the figure that governs how much cleaning comes out of one charge at a given mode and head.
Panasonic 18650 cells
Panasonic A grade 18650 cells with protection against over-current, short circuit and internal overheating, and 100 % QC of every battery before dispatch.
Sydney stock, tracked
Orders are processed within 24 hours at Granville, NSW 2142, with most parcels arriving in 3–7 working days.
Support in Australia
Full 1 year warranty and 30 day money back, handled by our team on info@aussiebatt.com, Monday to Friday 9am–4pm.
What you receive
One battery pack and the screws already on your machine — no cutting, no drilling, no adapter, and the charger you own is the charger you keep. If the pre-motor filter is tired too, Dyson Australia lists the V7/V8 pre-filter at AU $35.00; wash and dry yours fully before you attribute a cut-out to the battery.
Extras such as a printed fitting card, spare screws or a filter are not published on our SV10 listing, so they are flagged rather than assumed: [CONFIRM what printed material ships in the SV10 box].
Three steps, one screwdriver
The SV10 pack is screw-retained exactly like the V8. Photograph the label on the old battery before you remove it; that photo decides any future claim.
-
1
Loosen the retaining screws
Unplug the charger. The photo is our SV03 screw sequence and shows an SV03 label, but the screw-first method is identical on an SV10.
-
2
Swap the packs
Withdraw the old pack, line the replacement up to the same contacts and mounting points, and seat it squarely before tightening anything.
-
3
Refit, charge, clean
Refit your own screws snugly without forcing plastic threads, then run a full charge on your original 21.6 V Dyson charger.
Stop if the old pack shows any of this
Swelling, discoloration, a burnt smell, a hard drop or a soak, or cells rattling loose inside the case. Do not charge it and never puncture it — take it to an Australian household-battery recycler.
Why Dyson SV10 batteries fail on this platform
Same platform, same failure pattern
Everything written about the V8 applies here, because it is the same machine class: cells age through charge cycles, heat and flat storage, MAX mode shortens all three, and an SV10 kept in a hot laundry or a car loses capacity permanently. A blocked pre-motor filter or cyclone then produces cut-outs that look identical to a dead pack. Before you buy, clean the filters, clear the airway, let the machine cool for an hour and retest — then read the signs it is time to replace and the battery care guide.
Dyson SV10 battery questions, answered
Will fitting this SV10 battery void my Dyson warranty?
Most likely, yes, while the machine is inside Dyson's cover period — a third-party battery normally voids Dyson's cover on that machine. Our own limitation is published in full: our warranty does not extend to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. See does it void my warranty.
Can I use the charger that came with the SV10?
Yes. This pack takes the same 21.6 V Dyson charger as the V8. Never substitute a charger of a different voltage; if yours is missing, see the charger page.
The pack is warm after use — is that a fault?
Mild warmth is normal, especially on MAX or with a motorised head on carpet. Too hot to hold, cut-outs that only clear after cooling, or a burnt smell is not normal — stop and contact us.
How long will my SV10 run on a charge?
We publish no runtime minutes and will not invent any. The arithmetic is 21.6 V × 4.0 Ah = 86.4 Wh of stored energy. Minutes are that energy divided by the machine's draw, and the draw changes hugely between ECO and MAX, with the head, the floor and how clean the filters are.
Do I need the V8 battery or the SV10 battery — and is it click-in or screw-in?
The same one: our V8 page and this SV10 page describe one 21.6 V 4.0 Ah pack on code 214730-01, at the same AU $52.79. Both are screw-retained and reuse your original screws. Type A click and Type B screw labels belong to the older 22.2 V DC31–DC45 range; read click-in vs screw-in if you are unsure.
How do delivery and a warranty claim work?
Orders are processed within 24 hours at Granville, Sydney and most parcels arrive in 3–7 working days, tracked, with the number emailed. Email info@aussiebatt.com with the order number, the model code and the fault; support runs Monday to Friday 9am–4pm. Wrong fit? Use the 30 day money back window — see returns.
Other pages for this platform and the next one up
Dyson V8 replacement battery
Identical pack, identical AU $52.79 — the page for machines labelled V8.
See the V8 pageDyson V7 replacement battery
The neighbouring 21.6 V platform, Sony cells, code 968670-02, AU $50.79. It will not fit an SV10.
See the V7 packDyson V10 replacement battery
A different voltage entirely — 25.2 V, AU $75.79, three capacity listings published.
See the V10 packLabel says SV10, shop says V8 — we ship one pack
Send us the code printed on your battery and we will confirm the pack, the price and the delivery time in writing before you order.